У меня есть хост под Debian Wheezy.
Программное обеспечение для виртуализации - qemu / KVM и использует тома LVM в качестве дисков для гостей.
Все гости были установлены с использованием debian wheezy, полного шифрования диска, LVM (/ boot находится вне устройства luks, LVM разделен на /, / home, swap).
Дважды мне приходилось изменять размер диска для гостя с желанием увеличить объем / home гостя.
Что я сделал:
А затем я перезагружаю машину (после правильно размонтированных и закрытых томов и устройства luks), и требуется несколько часов, прежде чем я запрашиваю кодовую фразу.
Если кто-нибудь когда-либо сталкивался с этим или знает об этой проблеме, если я что-то делаю не так, пожалуйста, дайте мне знать!
Вот журнал dmesg с прошлого раза:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/srvices-root ro single console=tty0 console=ttyS0,115200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffe000 (usable) [ 0.000000] BIOS-e820: 00000000dfffe000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001a0000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fdad0] fdad0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfffe000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfffe000 page 4k [ 0.000000] kernel direct mapping tables up to dfffe000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001a0000000 [ 0.000000] 0100000000 - 01a0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1a0000000 @ dfffa000-dfffe000 [ 0.000000] RAMDISK: 369a4000 - 374ca000 [ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 00000000dfffff40 00040 [ 0.000000] ACPI: SSDT 00000000dffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 00000000dffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001a0000000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001a0000000 [ 0.000000] NODE_DATA [000000019fffb000 - 000000019fffffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:16a9701, boot clock [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199600000-ffff88019ebfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001a0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000dfffe [ 0.000000] 0: 0x00100000 -> 0x001a0000 [ 0.000000] On node 0 totalpages: 1572747 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 899126 pages, LIFO batch:31 [ 0.000000] Normal zone: 8960 pages used for memmap [ 0.000000] Normal zone: 646400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfffe000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000 [ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000 [ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000) [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fc00000 s82944 r8192 d23552 u1048576 [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] kvm-clock: cpu 0, msr 1:9fc13701, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 19fc0dfc0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1549446 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/srvices-root ro single console=tty0 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6116684k/6815744k available (3432k kernel code, 524756k absent, 174304k reserved, 3307k data, 580k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Detected 3415.532 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008000] Calibrating delay loop (skipped) preset value.. 6831.06 BogoMIPS (lpj=13662128) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] Security Framework initialized [ 0.008000] AppArmor: AppArmor disabled by boot time parameter [ 0.008000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015249] Mount-cache hash table entries: 256 [ 0.016170] Initializing cgroup subsys cpuacct [ 0.017500] Initializing cgroup subsys memory [ 0.018775] Initializing cgroup subsys devices [ 0.020011] Initializing cgroup subsys freezer [ 0.021356] Initializing cgroup subsys net_cls [ 0.022698] Initializing cgroup subsys blkio [ 0.024016] Initializing cgroup subsys perf_event [ 0.025383] mce: CPU supports 10 MCE banks [ 0.029219] ACPI: Core revision 20110623 [ 0.033372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.035377] CPU0: AMD QEMU Virtual CPU version 1.1.2 stepping 03 [ 0.040002] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms [ 0.040002] APIC delta adjusted to PM-Timer: 6249547 (7253497) [ 0.040002] Performance Events: Broken PMU hardware detected, using software events only. [ 0.040002] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.040121] Booting Node 0, Processors #1 Ok. [ 0.041284] smpboot cpu 1: start_ip = 98000 [ 0.053431] NMI watchdog disabled (cpu1): hardware events not enabled [ 0.053428] KVM setup async PF for cpu 1 [ 0.053428] kvm-stealtime: cpu 1, msr 19fd0dfc0 [ 0.053428] kvm-clock: cpu 1, msr 1:9fd13701, secondary cpu clock [ 0.060005] Brought up 2 CPUs [ 0.068011] Total of 2 processors activated (13662.12 BogoMIPS). [ 0.069677] devtmpfs: initialized [ 0.074798] print_constraints: dummy: [ 0.076177] NET: Registered protocol family 16 [ 0.077716] ACPI: bus type pci registered [ 0.079085] PCI: Using configuration type 1 for base access [ 0.080210] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.081863] mtrr: your CPUs had inconsistent MTRRdefType settings [ 0.084006] mtrr: probably your BIOS does not setup all CPUs. [ 0.085652] mtrr: corrected configuration. [ 0.088260] bio: create slab at 0 [ 0.089632] ACPI: Added _OSI(Module Device) [ 0.092010] ACPI: Added _OSI(Processor Device) [ 0.093576] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.096015] ACPI: Added _OSI(Processor Aggregator Device) [ 0.098360] ACPI: EC: Look up EC in DSDT [ 0.100581] ACPI: Interpreter enabled [ 0.102354] ACPI: (supports S0 S3 S4 S5) [ 0.104014] ACPI: Using IOAPIC for interrupt routing [ 0.113888] ACPI: No dock devices found. [ 0.115411] HEST: Table not found. [ 0.116017] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.118877] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.120055] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.120057] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.120059] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.120061] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.120094] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600 [ 0.120330] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601 [ 0.120657] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101 [ 0.122297] pci 0000:00:01.1: reg 20: [io 0xc0a0-0xc0af] [ 0.124442] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03 [ 0.126058] pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f] [ 0.126769] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680 [ 0.127047] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.128016] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.129795] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300 [ 0.132504] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.136052] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.141073] pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref] [ 0.141386] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200 [ 0.148589] pci 0000:00:03.0: reg 10: [io 0xc060-0xc07f] [ 0.149632] pci 0000:00:03.0: reg 14: [mem 0xfebf1000-0xfebf1fff] [ 0.156542] pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.156956] pci 0000:00:04.0: [1af4:1001] type 0 class 0x000100 [ 0.158142] pci 0000:00:04.0: reg 10: [io 0xc000-0xc03f] [ 0.159248] pci 0000:00:04.0: reg 14: [mem 0xfebf2000-0xfebf2fff] [ 0.164887] pci 0000:00:05.0: [1af4:1002] type 0 class 0x0000ff [ 0.165458] pci 0000:00:05.0: reg 10: [io 0xc080-0xc09f] [ 0.169256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169685] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.174231] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.176076] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.180978] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.184072] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.185535] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.187291] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.188014] vgaarb: loaded [ 0.188596] vgaarb: bridge control possible 0000:00:02.0 [ 0.189569] PCI: Using ACPI for IRQ routing [ 0.190306] PCI: pci_cache_line_size set to 64 bytes [ 0.190443] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.190448] reserve RAM buffer: 00000000dfffe000 - 00000000dfffffff [ 0.190645] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.192034] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.193147] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.212036] Switching to clocksource kvm-clock [ 0.214927] pnp: PnP ACPI init [ 0.215592] ACPI: bus type pnp registered [ 0.216366] pnp 00:00: [bus 00-ff] [ 0.216369] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.216371] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.216372] pnp 00:00: [io 0x0d00-0xffff window] [ 0.216374] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.216376] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 0.216426] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.216440] pnp 00:01: [io 0x0070-0x0071] [ 0.216472] pnp 00:01: [irq 8] [ 0.216473] pnp 00:01: [io 0x0072-0x0077] [ 0.216492] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.216526] pnp 00:02: [io 0x0060] [ 0.216529] pnp 00:02: [io 0x0064] [ 0.216545] pnp 00:02: [irq 1] [ 0.216564] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.216594] pnp 00:03: [irq 12] [ 0.216613] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.216633] pnp 00:04: [io 0x03f2-0x03f5] [ 0.216635] pnp 00:04: [io 0x03f7] [ 0.216650] pnp 00:04: [irq 6] [ 0.216652] pnp 00:04: [dma 2] [ 0.216683] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.216750] pnp 00:05: [io 0x03f8-0x03ff] [ 0.216766] pnp 00:05: [irq 4] [ 0.216784] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.216878] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 0.216906] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.217005] pnp: PnP ACPI: found 7 devices [ 0.217730] ACPI: ACPI bus type pnp unregistered [ 0.228506] PCI: max bus depth: 0 pci_try_num: 1 [ 0.228515] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.228517] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff] [ 0.228705] NET: Registered protocol family 2 [ 0.231459] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.235819] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.250779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.253381] TCP: Hash tables configured (established 524288 bind 65536) [ 0.255193] TCP reno registered [ 0.256172] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.257857] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.259902] NET: Registered protocol family 1 [ 0.260861] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.262056] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.263174] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.273610] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.275164] pci 0000:00:02.0: Boot video device [ 0.275194] PCI: CLS 0 bytes, default 64 [ 0.275261] Unpacking initramfs... [ 0.477514] Freeing initrd memory: 11416k freed [ 0.482711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.484075] Placing 64MB software IO TLB between ffff8800dbffa000 - ffff8800dfffa000 [ 0.485685] software IO TLB at phys 0xdbffa000 - 0xdfffa000 [ 0.487886] audit: initializing netlink socket (disabled) [ 0.489023] type=2000 audit(1414446944.488:1): initialized [ 0.507853] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.512541] VFS: Disk quotas dquot_6.5.2 [ 0.513981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.516081] msgmni has been set to 11968 [ 0.518658] alg: No test for stdrng (krng) [ 0.522396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.525107] io scheduler noop registered [ 0.526139] io scheduler deadline registered [ 0.527797] io scheduler cfq registered (default) [ 0.529671] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.547796] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.549695] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.551777] acpiphp: Slot [3] registered [ 0.553206] acpiphp: Slot [4] registered [ 0.554527] acpiphp: Slot [5] registered [ 0.555406] acpiphp: Slot [6] registered [ 0.556338] acpiphp: Slot [7] registered [ 0.557273] acpiphp: Slot [8] registered [ 0.558229] acpiphp: Slot [9] registered [ 0.559134] acpiphp: Slot [10] registered [ 0.560029] acpiphp: Slot [11] registered [ 0.560925] acpiphp: Slot [12] registered [ 0.561909] acpiphp: Slot [13] registered [ 0.562938] acpiphp: Slot [14] registered [ 0.564249] acpiphp: Slot [15] registered [ 0.565569] acpiphp: Slot [16] registered [ 0.566820] acpiphp: Slot [17] registered [ 0.568191] acpiphp: Slot [18] registered [ 0.569475] acpiphp: Slot [19] registered [ 0.570820] acpiphp: Slot [20] registered [ 0.572144] acpiphp: Slot [21] registered [ 0.573376] acpiphp: Slot [22] registered [ 0.574658] acpiphp: Slot [23] registered [ 0.575989] acpiphp: Slot [24] registered [ 0.577173] acpiphp: Slot [25] registered [ 0.578425] acpiphp: Slot [26] registered [ 0.579739] acpiphp: Slot [27] registered [ 0.580980] acpiphp: Slot [28] registered [ 0.582278] acpiphp: Slot [29] registered [ 0.583573] acpiphp: Slot [30] registered [ 0.584773] acpiphp: Slot [31] registered [ 0.586223] ERST: Table is not found! [ 0.587312] GHES: HEST is not enabled! [ 0.588856] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.629003] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.658059] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.660565] Linux agpgart interface v0.103 [ 0.673119] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.677148] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.678248] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.679836] mousedev: PS/2 mouse device common for all mice [ 0.681944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.684831] rtc_cmos 00:01: RTC can wake from S4 [ 0.686732] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.688777] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.690651] cpuidle: using governor ladder [ 0.691951] cpuidle: using governor menu [ 0.693583] TCP cubic registered [ 0.694984] NET: Registered protocol family 10 [ 0.697245] Mobile IPv6 [ 0.698222] NET: Registered protocol family 17 [ 0.709844] Registering the dns_resolver key type [ 0.714300] PM: Hibernation image not present or could not be loaded. [ 0.714348] registered taskstats version 1 [ 0.720212] rtc_cmos 00:01: setting system clock to 2014-10-27 21:55:43 UTC (1414446943) [ 0.724133] Initializing network drop monitor service [ 0.726898] Freeing unused kernel memory: 580k freed [ 0.727988] Write protecting the kernel read-only data: 6144k [ 0.730894] Freeing unused kernel memory: 648k freed [ 0.734594] Freeing unused kernel memory: 688k freed [ 0.856102] udevd[51]: starting version 175 [ 0.882389] SCSI subsystem initialized [ 0.887544] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.902570] usbcore: registered new interface driver usbfs [ 0.902753] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 0.903451] virtio-pci 0000:00:04.0: setting latency timer to 64 [ 0.904180] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.904217] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 0.908345] libata version 3.00 loaded. [ 0.908908] ata_piix 0000:00:01.1: version 2.13 [ 0.909051] ata_piix 0000:00:01.1: setting latency timer to 64 [ 0.912461] usbcore: registered new interface driver hub [ 0.916405] scsi0 : ata_piix [ 0.920989] usbcore: registered new device driver usb [ 0.923162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.925064] scsi1 : ata_piix [ 0.926215] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 [ 0.928003] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 [ 0.930726] uhci_hcd: USB Universal Host Controller Interface driver [ 0.933881] uhci_hcd 0000:00:01.2: setting latency timer to 64 [ 0.933890] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 0.935462] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 0.937756] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040 [ 0.939465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.941008] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.942864] usb usb1: Product: UHCI Host Controller [ 0.944217] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd [ 0.945600] usb usb1: SerialNumber: 0000:00:01.2 [ 0.947218] hub 1-0:1.0: USB hub found [ 0.948370] hub 1-0:1.0: 2 ports detected [ 0.958914] virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X [ 0.958937] virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X [ 0.958954] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X [ 0.971100] virtio-pci 0000:00:04.0: irq 43 for MSI/MSI-X [ 0.971120] virtio-pci 0000:00:04.0: irq 44 for MSI/MSI-X [ 0.971579] FDC 0 is a S82078B [ 0.973380] vda: vda1 vda2 [ 1.101935] ata2.01: NODEV after polling detection [ 1.102793] ata2.00: ATAPI: QEMU DVD-ROM, 1.1.2, max UDMA/100 [ 1.109793] ata2.00: configured for MWDMA2 [ 1.115456] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.1. PQ: 0 ANSI: 5 [ 1.148087] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.149401] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.151382] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.158778] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.260227] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 1.302176] device-mapper: uevent: version 1.0.3 [ 1.307903] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.456752] usb 1-1: New USB device found, idVendor=0627, idProduct=0001 [ 1.456755] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5 [ 1.456757] usb 1-1: Product: QEMU USB Tablet [ 1.456759] usb 1-1: Manufacturer: QEMU 1.1.2 [ 1.456760] usb 1-1: SerialNumber: 42 [ 1.485089] input: QEMU 1.1.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input1 [ 1.485328] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.1.2 QEMU USB Tablet] on usb-0000:00:01.2-1/input0 [ 1.485378] usbcore: registered new interface driver usbhid [ 1.485384] usbhid: USB HID core driver [ 6308.594031] PM: Starting manual resume from disk [ 6308.607186] PM: Hibernation image partition 253:2 present [ 6308.607188] PM: Looking for hibernation image. [ 6308.607520] PM: Image not found (code -22) [ 6308.607522] PM: Hibernation image not present or could not be loaded. [ 6308.684653] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 6310.590145] udevd[372]: starting version 175 [ 6310.869309] WARNING! power/level is deprecated; use power/control instead [ 6310.917370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6310.938347] ACPI: Power Button [PWRF] [ 6311.083046] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 6311.105034] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 6311.523064] Error: Driver 'pcspkr' is already registered, aborting... [ 6311.779350] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 6312.487542] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 6312.775121] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 6313.573035] loop: module loaded [ 6314.543459] Adding 8519676k swap on /dev/mapper/srvices-swap_1. Priority:-1 extents:1 across:8519676k [ 6326.584149] eth0: no IPv6 routers present
Иногда загрузка занимает больше времени, если на VG есть большие снимки. Пожалуйста, проверьте с "lvs", что вы не используете снимки ...