Назад | Перейти на главную страницу

Короткий автономный тест SMART никогда не заканчивается для всех дисков RAID1

У меня странная ситуация. Примерно через три года на сервере с низким трафиком один из двух дисков Samsung в RAID1 вчера вышел из строя:

Personalities : [raid1]
md0 : active raid1 sdb1[2](F) sda1[0]
      732572608 blocks [2/1] [U_]

Поскольку smartd ничего не сообщил, я проверил интеллектуальные атрибуты, и единственное подозрительное чтение, которое отличается от sdb (сбой) по сравнению с sda:

sda:
191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0

sdb:
191 G-Sense_Error_Rate      0x0022   098   098   000    Old_age   Always       -       27650

Ошибка G-sense в серверной стойке? Может датчик выходит из строя?

Но есть еще одно забавное чтение обе приводы: последние короткие автономные тесты - это «Прервано (сброс хоста)», и если я начну новый, например с участием smartctl --test=short /dev/sda, журнал выборочной самопроверки показывает:

SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Self_test_in_progress [90% left] (0-65535)

Однако этот короткий тест никогда не заканчивается, даже спустя несколько часов ситуация остается прежней - на обе диски. Неужели это ошибка прошивки накопителей? Или контроллер выходит из строя?

Вот полный дамп обоих дисков, на каждом из которых выполняется короткое самотестирование:

/ dev / sda:

smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.12.13-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD754JJ
Serial Number:    S281J9CZ500175
LU WWN Device Id: 5 0024e9 2026e8417
Firmware Version: 1AJ10001
User Capacity:    750,156,374,016 bytes [750 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Fri Mar 21 09:04:35 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                    90% of test remaining.
Total time to complete Offline
data collection:        ( 6540) seconds.
Offline data collection
capabilities:            (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 109) minutes.
SCT capabilities:          (0x003f) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       59
  2 Throughput_Performance  0x0026   055   052   000    Old_age   Always       -       6038
  3 Spin_Up_Time            0x0023   072   071   025    Pre-fail  Always       -       8729
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       10
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       23571
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       21
191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   060   053   000    Old_age   Always       -       40 (Min/Max 20/48)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   001   001   000    Old_age   Always       -       102119
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       21

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               90%     23571         -
# 2  Short offline       Aborted by host               90%     23571         -
# 3  Short offline       Aborted by host               90%     23571         -
# 4  Short offline       Aborted by host               90%     23571         -
# 5  Short offline       Interrupted (host reset)      90%     23571         -
# 6  Short offline       Interrupted (host reset)      90%     23571         -
# 7  Short offline       Interrupted (host reset)      90%     23571         -
# 8  Short offline       Interrupted (host reset)      90%     23571         -
# 9  Extended offline    Interrupted (host reset)      90%     23571         -
#10  Short offline       Interrupted (host reset)      90%     23571         -
#11  Short offline       Interrupted (host reset)      90%     23571         -
#12  Short offline       Completed without error       00%     23559         -
#13  Short offline       Completed without error       00%     23535         -
#14  Short offline       Completed without error       00%     23511         -
#15  Extended offline    Completed without error       00%     23495         -
#16  Short offline       Completed without error       00%     23487         -
#17  Short offline       Completed without error       00%     23463         -
#18  Short offline       Completed without error       00%     23439         -
#19  Short offline       Completed without error       00%     23415         -
#20  Short offline       Completed without error       00%     23391         -
#21  Short offline       Completed without error       00%     23367         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Self_test_in_progress [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/ dev / sdb:

smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.12.13-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD754JJ
Serial Number:    S281J9CZ500174
LU WWN Device Id: 5 0024e9 2026e840e
Firmware Version: 1AJ10001
User Capacity:    750,156,374,016 bytes [750 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Fri Mar 21 09:05:10 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                    90% of test remaining.
Total time to complete Offline
data collection:        ( 6960) seconds.
Offline data collection
capabilities:            (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 116) minutes.
SCT capabilities:          (0x003f) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       69
  2 Throughput_Performance  0x0026   055   054   000    Old_age   Always       -       6442
  3 Spin_Up_Time            0x0023   071   071   025    Pre-fail  Always       -       8885
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       10
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       23571
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       21
191 G-Sense_Error_Rate      0x0022   098   098   000    Old_age   Always       -       27650
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   054   000    Old_age   Always       -       35 (Min/Max 20/46)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   001   001   000    Old_age   Always       -       71575
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       21

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               90%     23571         -
# 2  Short offline       Aborted by host               90%     23571         -
# 3  Short offline       Aborted by host               90%     23571         -
# 4  Short offline       Aborted by host               90%     23571         -
# 5  Extended offline    Interrupted (host reset)      90%     23571         -
# 6  Short offline       Interrupted (host reset)      90%     23571         -
# 7  Short offline       Interrupted (host reset)      90%     23571         -
# 8  Short offline       Interrupted (host reset)      90%     23571         -
# 9  Short offline       Interrupted (host reset)      90%     23571         -
#10  Short offline       Interrupted (host reset)      90%     23571         -
#11  Short offline       Interrupted (host reset)      90%     23571         -
#12  Short offline       Interrupted (host reset)      90%     23571         -
#13  Short offline       Completed without error       00%     23558         -
#14  Short offline       Completed without error       00%     23534         -
#15  Short offline       Completed without error       00%     23510         -
#16  Short offline       Completed without error       00%     23486         -
#17  Extended offline    Completed without error       00%     23471         -
#18  Short offline       Completed without error       00%     23462         -
#19  Short offline       Completed without error       00%     23438         -
#20  Short offline       Completed without error       00%     23414         -
#21  Short offline       Completed without error       00%     23390         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Self_test_in_progress [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Спасибо за подсказки!

Здесь возможны ошибки контроллера. Прежде чем вы потратите на это слишком много времени, я бы посоветовал переустановить все кабели. Возможно, что-то со временем вышло из строя и вызывает проблемы.

Кроме того, вы упомянули smartd ... вы отключили это при попытке запустить самотестирование? Возможно, это мешает ручным тестам.

Было ли что-нибудь в dmesg о том, почему sdb считается неудачным? Похоже, что оба диска сообщают о своем состоянии как ПРОШЛО, и я не верю, что mdadm действительно использует какие-либо данные SMART для определения состояния диска.