Я только что установил один из наших серверов с Centos 6.7. Это машина, которой не пользовались как минимум год. Мне приходилось настраивать его пару раз, но каждый раз одна из проблем была с RAID на машине. Он настроен как RAID10, но у Centos, похоже, с ним проблемы.
У меня очень мало опыта работы с RAIDS в системах Linux, и я полностью застрял.
Вот вывод из / var / log / messages, который я считаю соответствующими частями.
Я могу выполнить любые команды, которые вам понадобятся для получения дополнительной информации.
ata8: port disabled. ignoring.
ata7.00: ATAPI: SONY DVD RW AW-Q170A, 1.73, max UDMA/66
ata7.00: configured for UDMA/66
scsi 6:0:0:0: CD-ROM SONY DVD RW AW-Q170A 1.73 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sda:
sdd:
sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde:
sdf: sde1 sde2
sd 4:0:0:0: [sde] Attached SCSI disk
unknown partition table
sd 3:0:0:0: [sdd] Attached SCSI disk
unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sdf1 sdf2
sd 5:0:0:0: [sdf] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning for dmraid devices ddf1_BOOT
dracut: Found dmraid sets:
dracut: ddf1_BOOT ddf1_STORAGE
dracut: Activating ddf1_BOOT
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sdd
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sda
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sdc
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sdb
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
dracut: RAID set "ddf1_BOOT" was activated
dracut: RAID set "ddf1_BOOT" was not activated
dracut: Scanning for dmraid devices ddf1_BOOT
dracut: Found dmraid sets:
dracut: ddf1_BOOT ddf1_STORAGE
dracut: Activating ddf1_BOOT
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sdd
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sda
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sdc
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_STORAGE" [1/2] on /dev/sdb
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
dracut: RAID set "ddf1_BOOT" already active
dracut: RAID set "ddf1_BOOT" was not activated
dracut: Scanning devices dm-2 for LVM logical volumes vg_backup2/lv_swap vg_backup2/lv_root
dracut: inactive '/dev/vg_backup2/lv_var' [375.14 GiB] inherit
dracut: inactive '/dev/vg_backup2/lv_root' [20.00 GiB] inherit
dracut: inactive '/dev/vg_backup2/lv_home' [20.00 GiB] inherit
dracut: inactive '/dev/vg_backup2/lv_swap' [30.00 GiB] inherit
dracut: inactive '/dev/vg_backup2/lv_log' [20.00 GiB] inherit
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
Кто-нибудь здесь может / хочет помочь?
РЕДАКТИРОВАТЬ: это HP ProLiant ML150 G3 и Вот это ссылка на полный журнал.
Он имеет 6 жестких дисков, два диска по 500 ГБ настроены как RAID 1 для операционной системы.
[0:0:0:0] disk ATA ST2000DM001-1ER1 CC25 /dev/sda
[1:0:0:0] disk ATA ST2000DM001-1ER1 CC25 /dev/sdb
[2:0:0:0] disk ATA ST1000DM003-1CH1 CC49 /dev/sdc
[3:0:0:0] disk ATA WDC WD10EALX-009 15.0 /dev/sdd
[4:0:0:0] disk ATA ST500DM002-1BD14 KC45 /dev/sde
[5:0:0:0] disk ATA WDC WD5003ABYX-0 01.0 /dev/sdf
РЕДАКТИРОВАТЬ 2: вывод dmesg
РЕДАКТИРОВАТЬ 3: Я попытался полностью удалить RAID, а затем воссоздать его без каких-либо результатов. Происходит то же самое.