Как смонтировать раздел с рабочего диска в RAID 1

Один из жестких дисков в массиве мертв, я не уверен, raid0 или raid1, я пытаюсь смонтировать рабочий диск и сделать резервную копию того, что осталось.

Если я приеду /dev/md127 то я могу видеть только некоторые файлы grub, общий размер которых составляет около 100 МБ.

Если я попытаюсь mount /dev/md1 Я получил:

root@rescue:~# mount /dev/md1 /mnt
mount: /dev/md1: can't read superblock

Некоторые выходы:

root@rescue:~# fdisk -l
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001f015

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63      208844      104391   fd  Linux raid autodetect
/dev/sdb2          208845    16787924     8289540   fd  Linux raid autodetect
/dev/sdb3        16787925  2930272064  1456742070   fd  Linux raid autodetect

Disk /dev/md127: 106 MB, 106823680 bytes
2 heads, 4 sectors/track, 26080 cylinders, total 208640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/md127 doesn't contain a valid partition table


root@rescue:~# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty]
md127 : active raid1 sdb1[1]
      104320 blocks [2/1] [_U]

unused devices: <none>

   root@rescue:~# mdadm --examine /dev/sdb2
/dev/sdb2:
          Magic : a92b4efc
        Version : 0.90.00
           UUID : fca66a1e:c6aba1f7:ace437e0:ae545265
  Creation Time : Thu Oct 21 01:57:07 2010
     Raid Level : raid0
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 1

    Update Time : Thu Oct 21 01:57:07 2010
          State : active
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0
       Checksum : 6138e9b8 - correct
         Events : 1

     Chunk Size : 256K

      Number   Major   Minor   RaidDevice State
this     1       8       18        1      active sync   /dev/sdb2

   0     0       8        2        0      active sync
   1     1       8       18        1      active sync   /dev/sdb2

Если кто-нибудь может поделиться, как правильно смонтировать драйвер, чтобы иметь доступ к данным (желательно в режиме только для чтения, чтобы я ничего не испортил, если это возможно) ...

root@rescue:~# mdadm --examine --scan
ARRAY /dev/md127 UUID=0464b5c4:d777ef5e:17b64c46:2e5e61c3
ARRAY /dev/md1 UUID=fca66a1e:c6aba1f7:ace437e0:ae545265
ARRAY /dev/md2 UUID=46c22b6d:dc9668a4:13d0e329:c7b8b0ca

И

root@rescue:~# mdadm --detail /dev/md126
mdadm: cannot open /dev/md126: No such file or directory

И

root@rescue:~/dd_rescue# mdadm --detail /dev/md1
mdadm: md device /dev/md1 does not appear to be active.
root@rescue:~/dd_rescue#
root@rescue:~/dd_rescue#
root@rescue:~/dd_rescue#
root@rescue:~/dd_rescue# mdadm --detail /dev/md2
mdadm: md device /dev/md2 does not appear to be active.

УМНАЯ

    root@rescue:~# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.2-xxxx-std-ipv6-32] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST_M13FQBL
Serial Number:    QNR_BFW
Firmware Version: 1117F38F
User Capacity:    4,142,054,400 bytes [4.14 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Thu May 16 01:37:37 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Values Read failed: scsi error aborted command
Smartctl: SMART Read Values failed.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Error SMART Error Log Read failed: scsi error aborted command
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: scsi error aborted command
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging