Я установил xampp, чтобы создать локальный веб-сайт. Я закончил работу над веб-сайтом и попытался экспортировать базу данных, чтобы переключиться на производство, и я заметил, что база данных на php, которую мой администратор, казалось, пуста (что было невозможно, потому что я работал с установкой wordpress в обычном режиме), поэтому я перезапустил xampp . С тех пор он не перезапускает mysql.
Я вошел в систему с помощью терминала и перешел в / opt / lampp / var / msql и попытался запустить вручную, но я получаю эту ошибку ОШИБКА 2002 (HY000): не удается подключиться к локальному серверу MySQL через сокет '/ opt / lampp / var / mysql / mysql.sock '(111)
что это такое? как исправить? Спасибо
вот что я пробовал
root@debian:/opt/lampp/var/mysql# mysql_upgrade
Version check failed. Got the following error when calling the 'mysql' command line client
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/opt/lampp/var/mysql/mysql.sock' (111)
FATAL ERROR: Upgrade failed
root@debian:/opt/lampp/var/mysql# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/opt/lampp/var/mysql/mysql.sock' (111)
мой debian.err показывает много таких
2020-04-03 21:56:23 1076 [ERROR] Incorrect definition of table mysql.column_stats: expected column 'min_value' at position 3 to have type varbinary(255), found type varchar(255).
2020-04-03 21:56:23 1076 [ERROR] Incorrect definition of table mysql.column_stats: expected column 'max_value' at position 4 to have type varbinary(255), found type varchar(255).
а это мой /opt/lampp/etc/my.cnf
root@debian:/opt/lampp/etc# cat my.cnf
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /opt/lampp/var/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port =3306
socket =/opt/lampp/var/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
default-character-set=utf8mb4
[mysqld]
user=mysql
port=3306
socket =/opt/lampp/var/mysql/mysql.sock
key_buffer=16M
max_allowed_packet=1M
table_open_cache=64
sort_buffer_size=512K
net_buffer_length=8K
read_buffer_size=256K
read_rnd_buffer_size=512K
myisam_sort_buffer_size=8M
# Where do all the plugins live
plugin_dir=/opt/lampp/lib/mysql/plugin/
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id =1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000
# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir=/opt/lampp/var/mysql/
innodb_data_file_path=ibdata1:10M:autoextend
innodb_log_group_home_dir=/opt/lampp/var/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size=16M
# Deprecated in 5.6
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size=5M
innodb_log_buffer_size=8M
innodb_flush_log_at_trx_commit=1
innodb_lock_wait_timeout=50
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
[mysqldump]
max_allowed_packet=16M
[mysql]
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer=20M
sort_buffer_size=20M
read_buffer=2M
write_buffer=2M
[myisamchk]
key_buffer=20M
sort_buffer_size=20M
read_buffer=2M
write_buffer=2M
[mysqlhotcopy]
я исправил это ... пошел в / opt / lampp / var / mysql и сделал
chown -R mysql: mysql mysql.sock
а потом
chmod -R 777 mysql.sock
перезапустил его из графического интерфейса XAMPP, и он сработал ...