Потеряно соединение с MySQL

Я установил Apache, mysqld под Slackware. Apache рабочий. Но сценарий:

$dblocation="127.0.0.1";
    $dbuser="root";
    $dbpasswd="unfriendly_possum";
    $dbcnx=mysql_connect($dblocation, $dbuser, $dbpasswd);
    if(!$dbcnx)
    {
        echo("Error");
        exit();
    }
    $dbq=mysql_query("select version();");
    echo(mysql_result($dbq,0));

возвращает ошибку

Warning: mysql_connect() [function.mysql-connect]: Lost connection to MySQL server at 'reading initial communication packet', system error: 111 in /usr/local/httpd/htdocs/mysql.php on line 8
Error

Помогите (я плачу)

UPD Я исправил $ dblocation = "127.0.0.1" на "localhost", но происходит другая ошибка:

Warning: mysql_connect() [function.mysql-connect]: Can't connect to local MySQL server through socket '/var/run/mysql/mysql.sock' (2) in /usr/local/httpd/htdocs/mysql.php on line 8
Error

фрагмент конфигурации php

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links.  -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

my.cnf часть:

[mysqld]
log             =/var/log/mysqld/mysqld.log
port            = 3306
socket          = /tmp/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id       = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir         = /tmp/
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/mysql/var/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql/var/
#innodb_log_arch_dir = /usr/local/mysql/var/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

Проверьте файл журнала MySQL, если что-то связано с этой ошибкой. Если вы хотите подключиться с помощью сокета MySQL Unix, измените эту строку:

socket          = /tmp/mysql.sock

socket          = /var/run/mysql/mysql.sock

Это должно решить эту проблему.

MySql работает? И правильно ли настроен PHP для подключения к нему в файле конфигурации (/etc/php.ini)?

Пытаться:

$dblocation="localhost";

По сути, я собираюсь повторить уже опубликованные хорошие идеи, но я хочу, чтобы вы попробовали несколько вещей по порядку в надежде найти конкретного виновника.

Ваш код хорош, поэтому попробуйте протестировать его по частям, чтобы вы могли вычеркнуть, что на самом деле работает. Вы должны обнаружить, что и 127.0.0.1, и localhost подходят в приведенном выше примере. И странно, что в ваших журналах ошибок сообщается, что он не может найти /var/run/mysql/mysql.sock, поскольку ваша конфигурация ссылается на /tmp/mysql.sock (вы пытались установить mysql поверх установки ОС по умолчанию?).

Убедитесь, что вы можете подключиться к MySQL из командной строки (все, что я собираюсь предложить спорно, если у вас нет SSH)
Запустите свой php-код из командной строки. Вам понадобится php cli. Вот установка:

yum install php-cli (RedHat)

apt-get install php5-cli (Debian)

Сообщите нам, если один или оба этих теста пройдут успешно.

MySQL открыл сокет в /tmp/mysqld.sock, но PHP ищет сокет /var/run/mysql/mysql.sock.

Вам нужно либо заставить PHP искать в /tmp/mysql.sock, либо заставить MySQL создать сокет в / var / run / mysql / mysql / sock - как предлагает Кедар.

Изменение PHP будет менее разрушительным. В вашем файле конфигурации есть две записи:

mysql.default_socket =

Измените оба из них (будет действовать только один, но я не знаю какой) на:

mysql.default_socket = /tmp/mysql.sock

MySQL немного странный: для клиентов MySQL "localhost" означает использование сокета домена UNIX для базы данных.

У меня такое чувство, что исправление этой части только вернет вас к исходной проблеме:

Lost connection to MySQL server at 'reading initial communication packet', system error: 111

Похоже на несовместимость клиентской и серверной версий. Вы используете библиотеки 3.23 для связи с сервером 5.1?