У меня есть VPS, на котором я установил веб-почту Dovecot, Postfix, PostfixAdmin и Roundcube.
Я не прикасался к нему несколько месяцев, но с 2/3 недель я больше не могу отправлять электронные письма. Я могу отправлять их только через RoundCube на любой адрес, в том числе внешний, а если я использую почтовый клиент, не размещенный на том же VPS, он не работает.
Это единственная ошибка:
May 22 15:57:17 mail postfix/smtps/smtpd[12433]: NOQUEUE: reject: RCPT from ns513574.ip-192-99-9.net[192.99.9.142]: 553 5.7.1 <support@elmondmc.com>: Sender address rejected: not owned by user support@elmondmc.com; from=<support@elmondmc.com> to=<nicolo@indst.eu> proto=ESMTP helo=<[192.99.9.142]>
Некоторая информация: - SMTP-сервер, подключенный в roundcube, не является localhost, TLS-соединение на порту 587.
Вот мой конфиг:
Main.cf:
127.0.0.1:10040_time_limit = 3600
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
smtpd_error_sleep_time = 1s
smtpd_soft_error_limit = 10
smtpd_hard_error_limit = 20
transport_maps = hash:/etc/postfix/transport
# Throttle limit policy mail (global)
smtp_destination_concurrency_limit = 4
polite_destination_rate_delay = 1s
smtp_extra_recipient_limit = 10
# Polite policy
polite_destination_concurrency_limit = 3
polite_destination_rate_delay = 1s
polite_destination_recipient_limit = 10
# Turtle policy
turtle_destination_concurrency_limit = 2
turtle_destination_rate_delay = 1s
turtle_destination_recipient_limit = 10
smtpd_sender_restrictions =
reject_unknown_sender_domain
permit_mynetworks
permit_sasl_authenticated
reject_unknown_reverse_client_hostname
smtpd_helo_required = yes
smtpd_helo_restrictions =
permit_mynetworks
permit_sasl_authenticated
check_helo_access hash:/etc/postfix/helo_access
reject_invalid_helo_hostname
reject_non_fqdn_helo_hostname
reject_unknown_helo_hostname
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
readme_directory = no
# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2
# TLS parameters
smtpd_tls_cert_file = /etc/letsencrypt/live/indst.eu/fullchain.pem
smtpd_tls_key_file = /etc/letsencrypt/live/indst.eu/privkey.pem
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
# Handing off local delivery to Dovecot's LMTP, and telling it where to store mail
virtual_transport = lmtp:unix:private/dovecot-lmtp
# Virtual domains, users, and aliases
smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated check_relay_domains
myhostname = mail.indst.eu
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = indst.eu
mydestination = $myhostname, localhost.indst.eu, localhost
relayhost =
mynetworks = 164.68.123.81 192.168.1.0/24 127.0.0.0/8
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = ipv4
relay_domains = mail.indst.eu
#home_mailbox = Maildir/
mailbox_command =
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_sasl_auth_enable = yes
smtpd_recipient_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated, reject_unauth_destination, reject_non_fqdn_recipient, reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_non_fqdn_hostname, reject_invalid_hostname, check_policy_service inet:127.0.0.1:10040, reject_unknown_reverse_client_hostname, reject_rbl_client zen.spamhaus.org, permit
smtp_tls_security_level = may
smtpd_tls_security_level = may
smtp_tls_note_starttls_offer = yes
smtp_use_tls=yes
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf
virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf
maximal_queue_lifetime = 1d
delay_warning_time = 0h
bounce_queue_lifetime = 1d
bounce_template_file = /etc/postfix/bounce.cf
milter_protocol = 6
milter_mail_macros = i {mail_addr} {client_addr} {client_name} {auth_authen}
milter_default_action = accept
smtpd_milters = inet:127.0.0.1:11332
non_smtpd_milters = inet:127.0.0.1:11332
Master.cf:
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (no) (never) (100)
# ==========================================================================
polite unix - - n - - smtp
turtle unix - - n - - smtp
smtp inet n - y - - smtpd
#smtp inet n - y - 1 postscreen
#smtpd pass - - y - - smtpd
#dnsblog unix - - y - 0 dnsblog
#tlsproxy unix - - y - 0 tlsproxy
submission inet n - n - - smtpd
-o syslog_name=postfix/submission
-o smtpd_tls_security_level=encrypt
-o smtpd_sasl_auth_enable=yes
# -o smtpd_reject_unlisted_recipient=no
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
-o smtpd_relay_restrictions=permit_sasl_authenticated,reject
-o milter_macro_daemon_name=ORIGINATING
smtps inet n - n - - smtpd
-o syslog_name=postfix/smtps
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
-o smtpd_relay_restrictions=permit_sasl_authenticated,reject
-o milter_macro_daemon_name=ORIGINATING
#628 inet n - y - - qmqpd
pickup unix n - y 60 1 pickup
cleanup unix n - y - 0 cleanup
qmgr unix n - n 300 1 qmgr
#qmgr unix n - n 300 1 oqmgr
tlsmgr unix - - y 1000? 1 tlsmgr
rewrite unix - - y - - trivial-rewrite
bounce unix - - y - 0 bounce
defer unix - - y - 0 bounce
trace unix - - y - 0 bounce
verify unix - - y - 1 verify
flush unix n - y 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - y - - smtp
relay unix - - y - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - y - - showq
error unix - - y - - error
retry unix - - y - - error
discard unix - - y - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - y - - lmtp
anvil unix - - y - 1 anvil
scache unix - - y - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
# mailbox_transport = lmtp:inet:localhost
# virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
Я не знаю, как возможно, что roundcube работает, если это не проблема localhost, поскольку roundcube подключается к тому же SMTP-серверу и успешно аутентифицируется.
Спасибо за уделенное время.
Изменить: кстати, я могу видеть любую входящую электронную почту с любого устройства.