Служба Postgresql не запускается

Я пытаюсь запустить сервер postgresql 10.10 на устройстве Armbian (Ubuntu Bionic с Armbian Linux 4.14.133-odroidxu4) (Odroid Xu4). Сервер раньше работал, но после сбоя питания не запускается. Я убедился, что файловая система в порядке. Я получаю следующие ошибки на postgresql@10-main.service журнал:

Sep 14 14:03:07 odroidxu4 postgresql@10-main[663]: Error: /usr/lib/postgresql/10/bin/pg_ctl /usr/lib/postgresql/10/bin/pg_ctl start -D /data/postgres/postgresql/10/main -l /var/log/postgresql/postgresql-10-main.log -s -o  -c config_file="/etc/postgresql/10/main/postgresql.conf"  exited with status 1:
Sep 14 14:03:07 odroidxu4 systemd[1]: postgresql@10-main.service: Can't open PID file /var/run/postgresql/10-main.pid (yet?) after start: No such file or directory
Sep 14 14:03:07 odroidxu4 systemd[1]: postgresql@10-main.service: Failed with result 'protocol'.
Sep 14 14:03:07 odroidxu4 systemd[1]: Failed to start PostgreSQL Cluster 10-main.

Я убедился, что каталог /var/run/postgresql существует и принадлежит postgres в группе postgres. Я пробовал переустановить сервер postgresql. Он может создавать файлы в /var/run/postgresql папка, так как после удаления папки и перезапуска службы она может создать папку и добавить файл 10-main.pg_stat_tmp.

Вот содержание /lib/systemd/system/postgresql@.service:

# systemd service template for PostgreSQL clusters. The actual instances will
# be called "postgresql@version-cluster", e.g. "postgresql@9.3-main". The
# variable %i expands to "version-cluster", %I expands to "version/cluster".
# (%I breaks for cluster names containing dashes.)

[Unit]
Description=PostgreSQL Cluster %i
ConditionPathExists=/etc/postgresql/%I/postgresql.conf
PartOf=postgresql.service
ReloadPropagatedFrom=postgresql.service
Before=postgresql.service

[Service]
Type=forking
# -: ignore startup failure (recovery might take arbitrarily long)
# the actual pg_ctl timeout is configured in pg_ctl.conf
ExecStart=-/usr/bin/pg_ctlcluster --skip-systemctl-redirect %i start
# 0 is the same as infinity, but "infinity" needs systemd 229
TimeoutStartSec=0
ExecStop=/usr/bin/pg_ctlcluster --skip-systemctl-redirect -m fast %i stop
TimeoutStopSec=1h
ExecReload=/usr/bin/pg_ctlcluster --skip-systemctl-redirect %i reload
PIDFile=/var/run/postgresql/%i.pid
SyslogIdentifier=postgresql@%i
# prevent OOM killer from choosing the postmaster (individual backends will
# reset the score to 0)
OOMScoreAdjust=-900
# restarting automatically will prevent "pg_ctlcluster ... stop" from working,
# so we disable it here. Also, the postmaster will restart by itself on most
# problems anyway, so it is questionable if one wants to enable external
# automatic restarts.
#Restart=on-failure
# (This should make pg_ctlcluster stop work, but doesn't:)
#RestartPreventExitStatus=SIGINT SIGTERM

[Install]
WantedBy=multi-user.target

Вот содержание /etc/postgresql/10/main/postgresql.conf:

# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
# "#" anywhere on a line.  The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal.  If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, run "pg_ctl reload", or execute
# "SELECT pg_reload_conf()".  Some parameters, which are marked below,
# require a server shutdown and restart to take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on".  Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
#                MB = megabytes                     s   = seconds
#                GB = gigabytes                     min = minutes
#                TB = terabytes                     h   = hours
#                                                   d   = days


#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------

# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.

data_directory = '/data/postgres/postgresql/10/main'        # use data in another directory
                    # (change requires restart)
hba_file = '/etc/postgresql/10/main/pg_hba.conf'    # host-based authentication file
                    # (change requires restart)
ident_file = '/etc/postgresql/10/main/pg_ident.conf'    # ident configuration file
                    # (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is written.
external_pid_file = '/var/run/postgresql/10-main.pid'           # write an extra PID file
                    # (change requires restart)


#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------

# - Connection Settings -

#listen_addresses = 'localhost'     # what IP address(es) to listen on;
                    # comma-separated list of addresses;
                    # defaults to 'localhost'; use '*' for all
                    # (change requires restart)
port = 5432             # (change requires restart)
max_connections = 100           # (change requires restart)
#superuser_reserved_connections = 3 # (change requires restart)
unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories
                    # (change requires restart)
#unix_socket_group = ''         # (change requires restart)
#unix_socket_permissions = 0777     # begin with 0 to use octal notation
                    # (change requires restart)
#bonjour = off              # advertise server via Bonjour
                    # (change requires restart)
#bonjour_name = ''          # defaults to the computer name
                    # (change requires restart)

# - Security and Authentication -

#authentication_timeout = 1min      # 1s-600s
ssl = on
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
#ssl_prefer_server_ciphers = on
#ssl_ecdh_curve = 'prime256v1'
#ssl_dh_params_file = ''
ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'
ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'
#ssl_ca_file = ''
#ssl_crl_file = ''
#password_encryption = md5      # md5 or scram-sha-256
#db_user_namespace = off
#row_security = on

# GSSAPI using Kerberos
#krb_server_keyfile = ''
#krb_caseins_users = off

# - TCP Keepalives -
# see "man 7 tcp" for details

#tcp_keepalives_idle = 0        # TCP_KEEPIDLE, in seconds;
                    # 0 selects the system default
#tcp_keepalives_interval = 0        # TCP_KEEPINTVL, in seconds;
                    # 0 selects the system default
#tcp_keepalives_count = 0       # TCP_KEEPCNT;
                    # 0 selects the system default


#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------

# - Memory -

shared_buffers = 512MB          # min 128kB
                    # (change requires restart)
#huge_pages = try           # on, off, or try
                    # (change requires restart)
#temp_buffers = 8MB         # min 800kB
#max_prepared_transactions = 0      # zero disables the feature
                    # (change requires restart)
# Caution: it is not advisable to set max_prepared_transactions nonzero unless
# you actively intend to use prepared transactions.
#work_mem = 4MB             # min 64kB
#maintenance_work_mem = 64MB        # min 1MB
#replacement_sort_tuples = 150000   # limits use of replacement selection sort
#autovacuum_work_mem = -1       # min 1MB, or -1 to use maintenance_work_mem
#max_stack_depth = 2MB          # min 100kB
dynamic_shared_memory_type = posix  # the default is the first option
                    # supported by the operating system:
                    #   posix
                    #   sysv
                    #   windows
                    #   mmap
                    # use none to disable dynamic shared memory
                    # (change requires restart)

# - Disk -

#temp_file_limit = -1           # limits per-process temp file space
                    # in kB, or -1 for no limit

# - Kernel Resource Usage -

#max_files_per_process = 1000       # min 25
                    # (change requires restart)
#shared_preload_libraries = ''      # (change requires restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = 0          # 0-100 milliseconds
#vacuum_cost_page_hit = 1       # 0-10000 credits
#vacuum_cost_page_miss = 10     # 0-10000 credits
#vacuum_cost_page_dirty = 20        # 0-10000 credits
#vacuum_cost_limit = 200        # 1-10000 credits

# - Background Writer -

#bgwriter_delay = 200ms         # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100        # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0      # 0-10.0 multiplier on buffers scanned/round
#bgwriter_flush_after = 512kB       # measured in pages, 0 disables

# - Asynchronous Behavior -

#effective_io_concurrency = 1       # 1-1000; 0 disables prefetching
#max_worker_processes = 8       # (change requires restart)
#max_parallel_workers_per_gather = 2    # taken from max_parallel_workers
#max_parallel_workers = 8       # maximum number of max_worker_processes that
                    # can be used in parallel queries
#old_snapshot_threshold = -1        # 1min-60d; -1 disables; 0 is immediate
                    # (change requires restart)
#backend_flush_after = 0        # measured in pages, 0 disables


#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------

# - Settings -

#wal_level = replica            # minimal, replica, or logical
                    # (change requires restart)
#fsync = on             # flush data to disk for crash safety
                    # (turning this off can cause
                    # unrecoverable data corruption)
#synchronous_commit = on        # synchronization level;
                    # off, local, remote_write, remote_apply, or on
#wal_sync_method = fsync        # the default is the first option
                    # supported by the operating system:
                    #   open_datasync
                    #   fdatasync (default on Linux)
                    #   fsync
                    #   fsync_writethrough
                    #   open_sync
#full_page_writes = on          # recover from partial page writes
#wal_compression = off          # enable compression of full-page writes
#wal_log_hints = off            # also do full page writes of non-critical updates
                    # (change requires restart)
#wal_buffers = -1           # min 32kB, -1 sets based on shared_buffers
                    # (change requires restart)
#wal_writer_delay = 200ms       # 1-10000 milliseconds
#wal_writer_flush_after = 1MB       # measured in pages, 0 disables

#commit_delay = 0           # range 0-100000, in microseconds
#commit_siblings = 5            # range 1-1000

# - Checkpoints -

#checkpoint_timeout = 5min      # range 30s-1d
#max_wal_size = 1GB
#min_wal_size = 80MB
#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
#checkpoint_flush_after = 256kB     # measured in pages, 0 disables
#checkpoint_warning = 30s       # 0 disables

# - Archiving -

#archive_mode = off     # enables archiving; off, on, or always
                # (change requires restart)
#archive_command = ''       # command to use to archive a logfile segment
                # placeholders: %p = path of file to archive
                #               %f = file name only
                # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
#archive_timeout = 0        # force a logfile segment switch after this
                # number of seconds; 0 disables


#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------

# - Sending Server(s) -

# Set these on the master and on any standby that will send replication data.

#max_wal_senders = 10       # max number of walsender processes
                # (change requires restart)
#wal_keep_segments = 0      # in logfile segments, 16MB each; 0 disables
#wal_sender_timeout = 60s   # in milliseconds; 0 disables

#max_replication_slots = 10 # max number of replication slots
                # (change requires restart)
#track_commit_timestamp = off   # collect timestamp of transaction commit
                # (change requires restart)

# - Master Server -

# These settings are ignored on a standby server.

#synchronous_standby_names = '' # standby servers that provide sync rep
                # method to choose sync standbys, number of sync standbys,
                # and comma-separated list of application_name
                # from standby(s); '*' = all
#vacuum_defer_cleanup_age = 0   # number of xacts by which cleanup is delayed

# - Standby Servers -

# These settings are ignored on a master server.

#hot_standby = on           # "off" disallows queries during recovery
                    # (change requires restart)
#max_standby_archive_delay = 30s    # max delay before canceling queries
                    # when reading WAL from archive;
                    # -1 allows indefinite delay
#max_standby_streaming_delay = 30s  # max delay before canceling queries
                    # when reading streaming WAL;
                    # -1 allows indefinite delay
#wal_receiver_status_interval = 10s # send replies at least this often
                    # 0 disables
#hot_standby_feedback = off     # send info from standby to prevent
                    # query conflicts
#wal_receiver_timeout = 60s     # time that receiver waits for
                    # communication from master
                    # in milliseconds; 0 disables
#wal_retrieve_retry_interval = 5s   # time to wait before retrying to
                    # retrieve WAL after a failed attempt

# - Subscribers -

# These settings are ignored on a publisher.

#max_logical_replication_workers = 4    # taken from max_worker_processes
                    # (change requires restart)
#max_sync_workers_per_subscription = 2  # taken from max_logical_replication_workers


#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_indexonlyscan = on
#enable_material = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on

# - Planner Cost Constants -

#seq_page_cost = 1.0            # measured on an arbitrary scale
#random_page_cost = 4.0         # same scale as above
#cpu_tuple_cost = 0.01          # same scale as above
#cpu_index_tuple_cost = 0.005       # same scale as above
#cpu_operator_cost = 0.0025     # same scale as above
#parallel_tuple_cost = 0.1      # same scale as above
#parallel_setup_cost = 1000.0   # same scale as above
#min_parallel_table_scan_size = 8MB
#min_parallel_index_scan_size = 512kB
effective_cache_size = 1GB

# - Genetic Query Optimizer -

#geqo = on
#geqo_threshold = 12
#geqo_effort = 5            # range 1-10
#geqo_pool_size = 0         # selects default based on effort
#geqo_generations = 0           # selects default based on effort
#geqo_selection_bias = 2.0      # range 1.5-2.0
#geqo_seed = 0.0            # range 0.0-1.0

# - Other Planner Options -

#default_statistics_target = 100    # range 1-10000
#constraint_exclusion = partition   # on, off, or partition
#cursor_tuple_fraction = 0.1        # range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8        # 1 disables collapsing of explicit
                    # JOIN clauses
#force_parallel_mode = off


#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------

# - Where to Log -

#log_destination = 'stderr'     # Valid values are combinations of
                    # stderr, csvlog, syslog, and eventlog,
                    # depending on platform.  csvlog
                    # requires logging_collector to be on.

# This is used when logging to stderr:
#logging_collector = off        # Enable capturing of stderr and csvlog
                    # into log files. Required to be on for
                    # csvlogs.
                    # (change requires restart)

# These are only used if logging_collector is on:
#log_directory = 'log'          # directory where log files are written,
                    # can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'    # log file name pattern,
                    # can include strftime() escapes
#log_file_mode = 0600           # creation mode for log files,
                    # begin with 0 to use octal notation
#log_truncate_on_rotation = off     # If on, an existing log file with the
                    # same name as the new log file will be
                    # truncated rather than appended to.
                    # But such truncation only occurs on
                    # time-driven rotation, not on restarts
                    # or size-driven rotation.  Default is
                    # off, meaning append to existing files
                    # in all cases.
#log_rotation_age = 1d          # Automatic rotation of logfiles will
                    # happen after that time.  0 disables.
#log_rotation_size = 10MB       # Automatic rotation of logfiles will
                    # happen after that much log output.
                    # 0 disables.

# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
#syslog_sequence_numbers = on
#syslog_split_messages = on

# This is only relevant when logging to eventlog (win32):
# (change requires restart)
#event_source = 'PostgreSQL'

# - When to Log -

#client_min_messages = notice       # values in order of decreasing detail:
                    #   debug5
                    #   debug4
                    #   debug3
                    #   debug2
                    #   debug1
                    #   log
                    #   notice
                    #   warning
                    #   error

#log_min_messages = warning     # values in order of decreasing detail:
                    #   debug5
                    #   debug4
                    #   debug3
                    #   debug2
                    #   debug1
                    #   info
                    #   notice
                    #   warning
                    #   error
                    #   log
                    #   fatal
                    #   panic

#log_min_error_statement = error    # values in order of decreasing detail:
                    #   debug5
                    #   debug4
                    #   debug3
                    #   debug2
                    #   debug1
                    #   info
                    #   notice
                    #   warning
                    #   error
                    #   log
                    #   fatal
                    #   panic (effectively off)

#log_min_duration_statement = -1    # -1 is disabled, 0 logs all statements
                    # and their durations, > 0 logs only
                    # statements running at least this number
                    # of milliseconds


# - What to Log -

#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_error_verbosity = default      # terse, default, or verbose messages
#log_hostname = off
log_line_prefix = '%m [%p] %q%u@%d '        # special values:
                    #   %a = application name
                    #   %u = user name
                    #   %d = database name
                    #   %r = remote host and port
                    #   %h = remote host
                    #   %p = process ID
                    #   %t = timestamp without milliseconds
                    #   %m = timestamp with milliseconds
                    #   %n = timestamp with milliseconds (as a Unix epoch)
                    #   %i = command tag
                    #   %e = SQL state
                    #   %c = session ID
                    #   %l = session line number
                    #   %s = session start timestamp
                    #   %v = virtual transaction ID
                    #   %x = transaction ID (0 if none)
                    #   %q = stop here in non-session
                    #        processes
                    #   %% = '%'
                    # e.g. '<%u%%%d> '
#log_lock_waits = off           # log lock waits >= deadlock_timeout
#log_statement = 'none'         # none, ddl, mod, all
#log_replication_commands = off
#log_temp_files = -1            # log temporary files equal or larger
                    # than the specified size in kilobytes;
                    # -1 disables, 0 logs all temp files
log_timezone = 'localtime'


# - Process Title -

cluster_name = '10/main'            # added to process titles if nonempty
                    # (change requires restart)
#update_process_title = on


#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#track_activities = on
#track_counts = on
#track_io_timing = off
#track_functions = none         # none, pl, all
#track_activity_query_size = 1024   # (change requires restart)
stats_temp_directory = '/var/run/postgresql/10-main.pg_stat_tmp'


# - Statistics Monitoring -

#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off


#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------

#autovacuum = on            # Enable autovacuum subprocess?  'on'
                    # requires track_counts to also be on.
#log_autovacuum_min_duration = -1   # -1 disables, 0 logs all actions and
                    # their durations, > 0 logs only
                    # actions running at least this number
                    # of milliseconds.
#autovacuum_max_workers = 3     # max number of autovacuum subprocesses
                    # (change requires restart)
#autovacuum_naptime = 1min      # time between autovacuum runs
#autovacuum_vacuum_threshold = 50   # min number of row updates before
                    # vacuum
#autovacuum_analyze_threshold = 50  # min number of row updates before
                    # analyze
#autovacuum_vacuum_scale_factor = 0.2   # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = 0.1  # fraction of table size before analyze
#autovacuum_freeze_max_age = 200000000  # maximum XID age before forced vacuum
                    # (change requires restart)
#autovacuum_multixact_freeze_max_age = 400000000    # maximum multixact age
                    # before forced vacuum
                    # (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms    # default vacuum cost delay for
                    # autovacuum, in milliseconds;
                    # -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1  # default vacuum cost limit for
                    # autovacuum, -1 means use
                    # vacuum_cost_limit


#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '"$user", public'    # schema names
#default_tablespace = ''        # a tablespace name, '' uses the default
#temp_tablespaces = ''          # a list of tablespace names, '' uses
                    # only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#default_transaction_deferrable = off
#session_replication_role = 'origin'
#statement_timeout = 0          # in milliseconds, 0 is disabled
#lock_timeout = 0           # in milliseconds, 0 is disabled
#idle_in_transaction_session_timeout = 0    # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#vacuum_multixact_freeze_min_age = 5000000
#vacuum_multixact_freeze_table_age = 150000000
#bytea_output = 'hex'           # hex, escape
#xmlbinary = 'base64'
#xmloption = 'content'
#gin_fuzzy_search_limit = 0
#gin_pending_list_limit = 4MB

# - Locale and Formatting -

datestyle = 'iso, mdy'
#intervalstyle = 'postgres'
timezone = 'localtime'
#timezone_abbreviations = 'Default'     # Select the set of available time zone
                    # abbreviations.  Currently, there are
                    #   Default
                    #   Australia (historical usage)
                    #   India
                    # You can create your own file in
                    # share/timezonesets/.
#extra_float_digits = 0         # min -15, max 3
#client_encoding = sql_ascii        # actually, defaults to database
                    # encoding

# These settings are initialized by initdb, but they can be changed.
lc_messages = 'C'           # locale for system error message
                    # strings
lc_monetary = 'C'           # locale for monetary formatting
lc_numeric = 'C'            # locale for number formatting
lc_time = 'C'               # locale for time formatting

# default configuration for text search
default_text_search_config = 'pg_catalog.english'

# - Other Defaults -

#dynamic_library_path = '$libdir'
#local_preload_libraries = ''
#session_preload_libraries = ''


#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------

#deadlock_timeout = 1s
#max_locks_per_transaction = 64     # min 10
                    # (change requires restart)
#max_pred_locks_per_transaction = 64    # min 10
                    # (change requires restart)
#max_pred_locks_per_relation = -2   # negative values mean
                    # (max_pred_locks_per_transaction
                    #  / -max_pred_locks_per_relation) - 1
#max_pred_locks_per_page = 2            # min 0


#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------

# - Previous PostgreSQL Versions -

#array_nulls = on
#backslash_quote = safe_encoding    # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#lo_compat_privileges = off
#operator_precedence_warning = off
#quote_all_identifiers = off
#standard_conforming_strings = on
#synchronize_seqscans = on

# - Other Platforms and Clients -

#transform_null_equals = off


#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------

#exit_on_error = off            # terminate session on any error?
#restart_after_crash = on       # reinitialize after backend crash?
#data_sync_retry = off          # retry or panic on failure to fsync
                    # data?
                    # (change requires restart)


#------------------------------------------------------------------------------
# CONFIG FILE INCLUDES
#------------------------------------------------------------------------------

# These options allow settings to be loaded from files other than the
# default postgresql.conf.

include_dir = 'conf.d'          # include files ending in '.conf' from
                    # a directory, e.g., 'conf.d'
#include_if_exists = ''         # include file only if it exists
#include = ''               # include file


#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------

# Add settings for extensions here