У меня CentOS 6.5
Я пытаюсь ввести git через yum, но при установке необходимых пакетов возникает ошибка. Мне не нужно, но запуск sudo с root-правами не повредит.
Сообщение об ошибке:
--> Finished Dependency Resolution
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is a problem. Eg.:
1. You have an upgrade for libselinux which is missing some
dependency that another package requires. Yum is trying to
solve this by installing an older version of libselinux of the
different architecture. If you exclude the bad architecture
yum will tell you what the root cause is (which package
requires what). You can try redoing the upgrade with
--exclude libselinux.otherarch ... this should give you an error
message showing the root cause of the problem.
2. You have multiple architectures of libselinux installed, but
yum can only see an upgrade for one of those arcitectures.
If you don't want/need both architectures anymore then you
can remove the one with the missing update and everything
will work.
3. You have duplicate versions of libselinux installed already.
You can use "yum check" to get yum show these errors.
...you can also use --setopt=protected_multilib=false to remove
this checking, however this is almost never the correct thing to
do as something else is very likely to go wrong (often causing
much more problems).
Protected multilib versions: libselinux-2.0.94-5.3.el6_4.1.i686 != libselinux-2.0.94-5.8.el6.x86_64
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
Полный журнал:
[root@server01 ~]# sudo yum -y install curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Package gcc-4.4.7-4.el6.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package expat-devel.x86_64 0:2.0.1-11.el6_2 will be installed
---> Package gettext-devel.x86_64 0:0.17-16.el6 will be installed
--> Processing Dependency: gettext-libs = 0.17-16.el6 for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: gettext = 0.17-16.el6 for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgettextsrc-0.17.so()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgettextpo.so.0()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgettextlib-0.17.so()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgcj_bc.so.1()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libasprintf.so.0()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
---> Package libcurl-devel.x86_64 0:7.19.7-37.el6_4 will be installed
--> Processing Dependency: libidn-devel for package: libcurl-devel-7.19.7-37.el6_4.x86_64
--> Processing Dependency: automake for package: libcurl-devel-7.19.7-37.el6_4.x86_64
---> Package openssl-devel.x86_64 0:1.0.1e-30.el6 will be installed
--> Processing Dependency: openssl = 1.0.1e-30.el6 for package: openssl-devel-1.0.1e-30.el6.x86_64
--> Processing Dependency: krb5-devel for package: openssl-devel-1.0.1e-30.el6.x86_64
---> Package perl-ExtUtils-MakeMaker.x86_64 0:6.55-136.el6 will be installed
--> Processing Dependency: perl-devel for package: perl-ExtUtils-MakeMaker-6.55-136.el6.x86_64
--> Processing Dependency: perl(Test::Harness) for package: perl-ExtUtils-MakeMaker-6.55-136.el6.x86_64
---> Package zlib-devel.x86_64 0:1.2.3-29.el6 will be installed
--> Running transaction check
---> Package automake.noarch 0:1.11.1-4.el6 will be installed
--> Processing Dependency: autoconf >= 2.62 for package: automake-1.11.1-4.el6.noarch
---> Package gettext.x86_64 0:0.17-16.el6 will be installed
--> Processing Dependency: cvs for package: gettext-0.17-16.el6.x86_64
---> Package gettext-libs.x86_64 0:0.17-16.el6 will be installed
---> Package krb5-devel.x86_64 0:1.10.3-37.el6_6 will be installed
--> Processing Dependency: krb5-libs = 1.10.3-37.el6_6 for package: krb5-devel-1.10.3-37.el6_6.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.10.3-37.el6_6.x86_64
--> Processing Dependency: libcom_err-devel for package: krb5-devel-1.10.3-37.el6_6.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.10.3-37.el6_6.x86_64
---> Package libgcj.x86_64 0:4.4.7-4.el6 will be installed
--> Processing Dependency: zip >= 2.1 for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libart_lgpl >= 2.1.0 for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: gtk2 >= 2.4.0 for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libasound.so.2(ALSA_0.9)(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libpangoft2-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libpangocairo-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libpango-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libgtk-x11-2.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libgdk_pixbuf-2.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libgdk-x11-2.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libfreetype.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libfontconfig.so.1()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libcairo.so.2()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libatk-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libasound.so.2()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libXtst.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libXrender.so.1()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libXrandr.so.2()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libSM.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libICE.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
---> Package libidn-devel.x86_64 0:1.18-2.el6 will be installed
---> Package openssl.x86_64 0:1.0.1e-15.el6 will be updated
---> Package openssl.x86_64 0:1.0.1e-30.el6 will be an update
---> Package perl-Test-Harness.x86_64 0:3.17-136.el6 will be installed
---> Package perl-devel.x86_64 4:5.10.1-136.el6 will be installed
--> Processing Dependency: perl(ExtUtils::ParseXS) for package: 4:perl-devel-5.10.1-136.el6.x86_64
--> Processing Dependency: gdbm-devel for package: 4:perl-devel-5.10.1-136.el6.x86_64
--> Processing Dependency: db4-devel for package: 4:perl-devel-5.10.1-136.el6.x86_64
--> Running transaction check
---> Package alsa-lib.x86_64 0:1.0.22-3.el6 will be installed
---> Package atk.x86_64 0:1.30.0-1.el6 will be installed
---> Package autoconf.noarch 0:2.63-5.1.el6 will be installed
---> Package cairo.x86_64 0:1.8.8-3.1.el6 will be installed
--> Processing Dependency: libpng12.so.0(PNG12_0)(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
--> Processing Dependency: libpng12.so.0()(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
--> Processing Dependency: libpixman-1.so.0()(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
--> Processing Dependency: libX11.so.6()(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
---> Package cvs.x86_64 0:1.11.23-16.el6 will be installed
---> Package db4-devel.x86_64 0:4.7.25-18.el6_4 will be installed
--> Processing Dependency: db4-cxx = 4.7.25-18.el6_4 for package: db4-devel-4.7.25-18.el6_4.x86_64
--> Processing Dependency: libdb_cxx-4.7.so()(64bit) for package: db4-devel-4.7.25-18.el6_4.x86_64
---> Package fontconfig.x86_64 0:2.8.0-3.el6 will be installed
---> Package freetype.x86_64 0:2.3.11-14.el6_3.1 will be installed
---> Package gdbm-devel.x86_64 0:1.8.0-36.el6 will be installed
---> Package gtk2.x86_64 0:2.20.1-4.el6 will be installed
--> Processing Dependency: libtiff >= 3.6.1 for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libjpeg.so.62(LIBJPEG_6.2)(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: hicolor-icon-theme for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libtiff.so.3()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libjpeg.so.62()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libjasper.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libcups.so.2()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXinerama.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXi.so.6()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXfixes.so.3()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXext.so.6()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXdamage.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXcursor.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXcomposite.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
---> Package keyutils-libs-devel.x86_64 0:1.4-4.el6 will be installed
---> Package krb5-libs.x86_64 0:1.10.3-10.el6_4.6 will be updated
---> Package krb5-libs.x86_64 0:1.10.3-37.el6_6 will be an update
---> Package libICE.x86_64 0:1.0.6-1.el6 will be installed
---> Package libSM.x86_64 0:1.2.1-2.el6 will be installed
---> Package libXrandr.x86_64 0:1.4.0-1.el6 will be installed
---> Package libXrender.x86_64 0:0.9.7-2.el6 will be installed
---> Package libXtst.x86_64 0:1.2.1-2.el6 will be installed
---> Package libart_lgpl.x86_64 0:2.3.20-5.1.el6 will be installed
---> Package libcom_err-devel.x86_64 0:1.41.12-18.el6 will be installed
---> Package libselinux-devel.x86_64 0:2.0.94-5.3.el6_4.1 will be installed
--> Processing Dependency: libselinux = 2.0.94-5.3.el6_4.1 for package: libselinux-devel-2.0.94-5.3.el6_4.1.x86_64
--> Processing Dependency: libsepol-devel >= 2.0.32-1 for package: libselinux-devel-2.0.94-5.3.el6_4.1.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.0.94-5.3.el6_4.1.x86_64
---> Package pango.x86_64 0:1.28.1-7.el6_3 will be installed
--> Processing Dependency: libthai >= 0.1.9 for package: pango-1.28.1-7.el6_3.x86_64
--> Processing Dependency: libthai.so.0(LIBTHAI_0.1)(64bit) for package: pango-1.28.1-7.el6_3.x86_64
--> Processing Dependency: libthai.so.0()(64bit) for package: pango-1.28.1-7.el6_3.x86_64
--> Processing Dependency: libXft.so.2()(64bit) for package: pango-1.28.1-7.el6_3.x86_64
---> Package perl-ExtUtils-ParseXS.x86_64 1:2.2003.0-136.el6 will be installed
---> Package zip.x86_64 0:3.0-1.el6 will be installed
--> Running transaction check
---> Package cups-libs.x86_64 1:1.4.2-50.el6_4.5 will be installed
--> Processing Dependency: libgnutls.so.26(GNUTLS_1_4)(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
--> Processing Dependency: libgnutls.so.26()(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
--> Processing Dependency: libavahi-common.so.3()(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
--> Processing Dependency: libavahi-client.so.3()(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
---> Package db4-cxx.x86_64 0:4.7.25-18.el6_4 will be installed
---> Package hicolor-icon-theme.noarch 0:0.11-1.1.el6 will be installed
---> Package jasper-libs.x86_64 0:1.900.1-15.el6_1.1 will be installed
---> Package libX11.x86_64 0:1.5.0-4.el6 will be installed
--> Processing Dependency: libX11-common = 1.5.0-4.el6 for package: libX11-1.5.0-4.el6.x86_64
--> Processing Dependency: libxcb.so.1()(64bit) for package: libX11-1.5.0-4.el6.x86_64
---> Package libXcomposite.x86_64 0:0.4.3-4.el6 will be installed
---> Package libXcursor.x86_64 0:1.1.13-6.20130524git8f677eaea.el6 will be installed
---> Package libXdamage.x86_64 0:1.1.3-4.el6 will be installed
---> Package libXext.x86_64 0:1.3.1-2.el6 will be installed
---> Package libXfixes.x86_64 0:5.0-3.el6 will be installed
---> Package libXft.x86_64 0:2.3.1-2.el6 will be installed
---> Package libXi.x86_64 0:1.6.1-3.el6 will be installed
---> Package libXinerama.x86_64 0:1.1.2-2.el6 will be installed
---> Package libjpeg-turbo.x86_64 0:1.2.1-1.el6 will be installed
---> Package libpng.x86_64 2:1.2.49-1.el6_2 will be installed
---> Package libselinux.i686 0:2.0.94-5.3.el6_4.1 will be installed
--> Processing Dependency: libdl.so.2(GLIBC_2.1) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: libdl.so.2(GLIBC_2.0) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: libdl.so.2 for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.8) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: ld-linux.so.2(GLIBC_2.3) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: ld-linux.so.2 for package: libselinux-2.0.94-5.3.el6_4.1.i686
---> Package libsepol-devel.x86_64 0:2.0.41-4.el6 will be installed
---> Package libthai.x86_64 0:0.1.12-3.el6 will be installed
---> Package libtiff.x86_64 0:3.9.4-9.el6_3 will be installed
---> Package pixman.x86_64 0:0.26.2-5.el6_4 will be installed
--> Running transaction check
---> Package avahi-libs.x86_64 0:0.6.25-12.el6 will be installed
---> Package glibc.x86_64 0:2.12-1.132.el6 will be updated
--> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64
--> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-headers-2.12-1.132.el6.x86_64
--> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-common-2.12-1.132.el6.x86_64
---> Package glibc.i686 0:2.12-1.149.el6_6.5 will be installed
--> Processing Dependency: libfreebl3.so(NSSRAWHASH_3.12.3) for package: glibc-2.12-1.149.el6_6.5.i686
--> Processing Dependency: libfreebl3.so for package: glibc-2.12-1.149.el6_6.5.i686
---> Package glibc.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package gnutls.x86_64 0:2.8.5-10.el6_4.2 will be installed
---> Package libX11-common.noarch 0:1.5.0-4.el6 will be installed
---> Package libxcb.x86_64 0:1.8.1-1.el6 will be installed
--> Processing Dependency: libXau.so.6()(64bit) for package: libxcb-1.8.1-1.el6.x86_64
--> Running transaction check
---> Package glibc-common.x86_64 0:2.12-1.132.el6 will be updated
---> Package glibc-common.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package glibc-devel.x86_64 0:2.12-1.132.el6 will be updated
---> Package glibc-devel.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated
---> Package glibc-headers.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package libXau.x86_64 0:1.0.6-4.el6 will be installed
---> Package nss-softokn-freebl.i686 0:3.14.3-9.el6 will be installed
--> Finished Dependency Resolution
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is a problem. Eg.:
1. You have an upgrade for libselinux which is missing some
dependency that another package requires. Yum is trying to
solve this by installing an older version of libselinux of the
different architecture. If you exclude the bad architecture
yum will tell you what the root cause is (which package
requires what). You can try redoing the upgrade with
--exclude libselinux.otherarch ... this should give you an error
message showing the root cause of the problem.
2. You have multiple architectures of libselinux installed, but
yum can only see an upgrade for one of those arcitectures.
If you don't want/need both architectures anymore then you
can remove the one with the missing update and everything
will work.
3. You have duplicate versions of libselinux installed already.
You can use "yum check" to get yum show these errors.
...you can also use --setopt=protected_multilib=false to remove
this checking, however this is almost never the correct thing to
do as something else is very likely to go wrong (often causing
much more problems).
Protected multilib versions: libselinux-2.0.94-5.3.el6_4.1.i686 != libselinux-2.0.94-5.8.el6.x86_64
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
[root@server01 ~]#
ням реполист показывает мне:
[root@server01 ~]# yum repolist
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
repo id repo name status
puppetlabs-deps Puppet Labs Dependencies El 6 - x86_64 77
puppetlabs-products Puppet Labs Products El 6 - x86_64 538
release.update 6.6.5 6,367
supplemental.release supplemental.6 84
supplemental.release.update supplemental.6.6.5 1
repolist: 7,067
[root@server01 ~]#
Пытался запустить следующие команды, но ошибки все еще отсутствуют (выполняется некоторая загрузка / разрешение зависимостей, но затем, наконец, возникает следующая новая ошибка). yum-complete-transaction; yum-distro-sync; вкуснятина чистая все; ням обновление
Transaction Check Error:
file /usr/bin/extlookup2hiera from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/hiera/backend/puppet_backend.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/hiera/scope.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/hiera_puppet.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera_array.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera_hash.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera_include.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
Error Summary
-------------
я видел это Почта для установки дополнительного репозитория пакетов для CentOS 6 (x86_64), но это не помогло. Теперь я получаю третью ошибку.
# wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
# rpm -ivh epel-release-6-8.noarch.rpm
warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY
Preparing... ########################################### [100%]
1:epel-release ########################################### [100%]
[root@server01 yum.repos.d]#
Сейчас ням реполист показывает дополнительную строку (для дополнительных пакетов - CentOS):
epel Extra Packages for Enterprise Linux 6 - x86_64 11,838
Все еще работает: sudo yum -y установить curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker все еще дает мне ту же ошибку (которую я получил первым, как упоминалось вверху).
/etc/yum.repos.d содержит - # pwd; ls -l
/etc/yum.repos.d
total 32
-rw-r--r-- 1 root root 14540 Nov 5 2012 epel-release-6-8.noarch.rpm
-rw-r--r-- 1 root root 957 Nov 4 2012 epel.repo
-rw-r--r-- 1 root root 1056 Nov 4 2012 epel-testing.repo
-rw-r--r--. 1 root root 1250 Jan 22 2014 puppetlabs.repo
-rw-r--r--. 1 root root 406 Dec 8 10:48 mycompany.redhat.repo
Puppetlabs.repo кажется лишним для этого поста, первые 2 файла .repo были установлены здесь после того, как я загрузил + установил дополнительный пакет repo rpm (как указано в сообщении / ссылке выше), а содержимое в mycompany.redhat.repo:
[release.update]
name=$releasever.$YUM0
baseurl=http://manager/yum/$basearch/$releasever/$YUM0/Server
enabled=1
gpgcheck=0
[supplemental.release]
name=supplemental.$releasever
baseurl=http://manager/yum/$basearch/supplemental/$releasever
enabled=1
gpgcheck=0
[supplemental.release.update]
name=supplemental.$releasever.$YUM0
baseurl=http://manager/yum/$basearch/supplemental/$YUM0
enabled=1
gpgcheck=0
Благодаря Майклу Х. я создал файл в /etc/yum.repos.d/CentOS-Base.repo (я сделал его немного общим, чтобы он мог работать с любой версией 6.x или 7). На 6.5 заработало. Если вы обнаружите какие-либо проблемы с использованием этого файла с CentOS 7.x, тогда все, что вам нужно, это правильный CentOS-Base.repo (официальный файл .repo для CentOS 7.x или любой версии XY), и проблема, которая появится в сообщении, будет решено.
Содержимое /etc/yum.repos.d/CentOS-Base-Custom.repo (PS: Я назвал его custom, поскольку вместо жестко заданной версии 6 я использовал $ releasever переменная в имя, зеркальный список, baseurl, gpgkey поля внутри файла .repo.
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
#baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
Ран: sudo yum -y установить curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker и он работал без ошибок.
Повторно запустил то же самое, и результат пришел как ожидалось.
[root@server01 yum.repos.d]# sudo yum -y install curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.symnds.com
* epel: mirror.cogentco.com
* extras: centos.mirror.nac.net
* updates: mirror.ash.fastserv.com
Setting up Install Process
Package libcurl-devel-7.19.7-46.el6.x86_64 already installed and latest version
Package expat-devel-2.0.1-11.el6_2.x86_64 already installed and latest version
Package gettext-devel-0.17-18.el6.x86_64 already installed and latest version
Package openssl-devel-1.0.1e-42.el6_7.1.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Package gcc-4.4.7-16.el6.x86_64 already installed and latest version
Package perl-ExtUtils-MakeMaker-6.55-141.el6_7.1.x86_64 already installed and latest version
Nothing to do
[root@server01 yum.repos.d]#
Все, что мне сейчас нужно, это использовать модуль шаблона в Ansible (и установить этот файл в папку /etc/yum.repos.d на целевой машине), и после этого вышеуказанные предварительные требования будут установлены без каких-либо ошибок, и ansible установит желаемая (определяемая пользователем версия GIT), которая мне нужна.