Есть ли способ узнать IP-адрес iLO для сервера в моей сети? У меня работает сервер, к которому я могу получить доступ только через iLO (другой доступ недоступен), но я не знаю IP-адрес, на котором работает iLO.
Есть ли способ узнать IP-адрес iLO сервера из сети, просмотрев трафик?
Сервер - это HP ProLiant, работающий под управлением HPs iLO.
Ищите порты, уникальные для МОТ, например 17988: nmap -sT -p 17988 iprange
... например:
nmap -sT -p 17988 --open 192.168.20.0/24
Я использовал этот скрипт в предыдущей работе, и он работал очень хорошо, обнаружив ило, о существовании которых я не знал.
http://blog.nachotech.com/?p=63
Скрипт зависит от tr sed expr curl и nmap
#!/bin/bash
#
# findilos - Search a local network segment for iLOs
# The iLO is the Integrated Lights-Out management processor
# used on HP ProLiant and BladeSystem servers
#
scriptversion="1.0"
#
# Author: iggy@nachotech.com
#
# Website: http://blog.nachotech.com
#
# Requires: tr sed expr curl nmap
#
# Tested with: Nmap 4.20, curl 7.17.1, RHEL4
#
# Note: Discovery of an iLO is dependent upon the Virtual Media port
# being set to the default of 17988. If this has been changed
# by the iLO administrator, then this script will NOT find it.
#
# Also, if the iLO XML Reply Data Return has been Disabled by
# the iLO administrator, this script will not be able to
# gather any information about the server. It will still be
# discovered, but all you will see is its IP address.
#
# GLOBAL VARIABLES
scriptname="findilos"
iloips="/tmp/tmpilos.$$"
iloxml="/tmp/tmpiloxml.$$"
ilohwvers="/tmp/tmpilohwvers.$$"
declare -i ilosfound=0
# FUNCTIONS
function parseiloxml {
fgrep "$1" $iloxml > /dev/null 2>&1
if [ $? -ne 0 ]
then
# tag not found in xml output, return empty string
parsedstring="N/A"
else
# tag was found - now we parse it from the output
tempstring=$( cat $iloxml | tr -d -c [:print:] | sed "s/^.*<$1>//" | sed "s/<.$1.*//")
# trim off leading and trailing whitespace
parsedstring=`expr match "$tempstring" '[ \t]*\(.*[^ \t]\)[ \t]*$'`
fi
}
function is_installed {
which $1 > /dev/null 2>&1
if [ $? -ne 0 ]
then
printf "\nERROR: %s not installed.\n\n" $1
exit 255
fi
}
# MAIN
# check for tools that we depend upon
is_installed tr
is_installed sed
is_installed expr
is_installed curl
is_installed nmap
# check syntax - should have 1 and only 1 parameter on cmdline
if [ $# -ne 1 ]; then
printf "%s %s ( http://blog.nachotech.com/ )\n" $scriptname $scriptversion
printf "Usage: %s {target network specification}\n" $scriptname
printf "TARGET NETWORK SPECIFICATION:\n"
printf " Can pass hostnames, IP addresses, networks, etc.\n"
printf " Ex: server1.company.com, company.com/24, 192.168.0.1/16, 10.0.0-255.1-254\n"
printf "EXAMPLE:\n"
printf " %s 16.32.64.0/22\n" $scriptname
exit 255
fi
iprange=$1
# prepare lookup file for iLO hardware versions
cat > $ilohwvers << EOF
iLO-1 shows hw version ASIC: 2
iLO-2 shows hw version ASIC: 7
i-iLO shows hw version T0
EOF
#
# scan a range of IP addresses looking for an
# open tcp port 17988 (the iLO virtual media port)
#
printf "Scanning..."
nmap -n -P0 -sS -p 17988 -oG - $iprange | fgrep /open/ | awk '{print $2}' > $iloips
printf "\n\n"
#
# open and read the list of IP addresses one at a time
#
exec 3< $iloips
echo "--------------- ------ -------- ------------ -------------------------"
echo "iLO IP Address iLO HW iLO FW Server S/N Server Model"
echo "--------------- ------ -------- ------------ -------------------------"
while read iloip <&3 ; do
ilosfound=$ilosfound+1
#
# attempt to read the xmldata from iLO, no password required
#
curl --proxy "" --fail --silent --max-time 3 http://$iloip/xmldata item=All > $iloxml
#
# parse out the Server model (server product name)
# from the XML output
#
parseiloxml SPN; servermodel=$parsedstring
parseiloxml SBSN; sernum=$parsedstring
parseiloxml PN; ilotype=$parsedstring
parseiloxml FWRI; ilofirmware=$parsedstring
parseiloxml HWRI; ilohardware=$parsedstring
ilohwver=$(grep "$ilohardware" $ilohwvers|awk '{print $1}')
if [ "$ilohwver" == "" ]; then
ilohwver="N/A"
fi
if [ "$sernum" == "" ]; then
sernum="N/A"
fi
printf "%-15s %-6s %-8s %-12s %s\n" $iloip "$ilohwver" "$ilofirmware" "$sernum" "$servermodel"
done
printf "\n%d iLOs found on network target %s.\n\n" $ilosfound $iprange
rm -f $iloips $iloxml $ilohwvers
exit 0
Пример выполнения
criggie@thionite:~/bin$ sudo ./findilos 10.28.0.0/16
Scanning...
--------------- ------ -------- ------------ -------------------------
iLO IP Address iLO HW iLO FW Server S/N Server Model
--------------- ------ -------- ------------ -------------------------
10.28.1.16 N/A N/A N/A DL380G6
10.28.1.17 N/A N/A N/A DL380G6
10.28.100.203 N/A N/A N/A DL380G8
3 iLOs found on network target 10.28.0.0/16.
Для меня этот сценарий занял 29 секунд для сканирования / 16 и 11 секунд для сканирования / 24.