Это может показаться глупым. Однако его консультант посоветовал клиенту выбрать комбинацию из 6 x 2 ГБ памяти и 6x4 ГБ, когда его попросили заполнить сервер DL 180 G6 36 ГБ оперативной памяти. Я проверил руководство, чтобы найти какие-либо правдоподобные причины, но не нашел ни одной. Пробовал гуглить, ответов нет.
Учитывая, что HP оценивает модули памяти, клиент в конечном итоге экономит около 150 долларов, если выбирает 4G x9. Есть ли что-нибудь, что говорит о том, что использование четного количества модулей памяти обеспечивает лучшую производительность или что производительность заполняемых вами банков памяти повышается? Звучит очень нелогично
Используемые процессоры: Intel Xeon 5620
Вы не можете разделить 9 димм на два процессора. Для полноценного использования DDR3 диммы должны быть установлены группами по три на процессор. DL180 имеет 12 слотов памяти, если память обслуживает, и шесть назначаются на каждый сокет ЦП.
Рекомендации по заполнению памяти для сервера DL180 G6 опубликованы здесь: http://h18000.www1.hp.com/products/quickspecs/13248_na/13248_na.HTML#Memory
Ниже приведены некоторые инструкции по установке DIMM:
For servers with twelve (12) memory slots
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
You can only install two quad-rank DIMMs per channel
You can install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
См. Также: Как мне заполнить мой сервер ProLiant DL320 G6 памятью?