У меня есть веб-сайт с подкаталогом администратора, который защищен встроенной проверкой подлинности Windows. Безупречно работает с удаленных ПК. Но когда я пытаюсь получить доступ к этим страницам на самом сервере, я получаю ошибку авторизации. Я использую правильное имя хоста, а не localhost. Пробовал Chrome и IE, результат тот же.
Какие-либо предложения?
Вы почти наверняка сталкиваетесь с проверкой обратной связи Windows, которая была представлена в IIS 5.1. Это функция безопасности, позволяющая избежать определенных типов атак отражения на систему.
Microsoft имеет Статья в базе знаний описание обходных путей. Они в основном сводятся к изменению реестра, чтобы либо отключить проверку обратной связи, либо разрешить определенным именам хостов (например, имя вашего локального хоста или имя сайта) для обратного подключения.
Вы можете быстро отключить проверку через PowerShell:
New-ItemProperty HKLM:\System\CurrentControlSet\Control\Lsa -Name "DisableLoopbackCheck" -Value "1" -PropertyType dword
Ниже приведены официальные инструкции Microsoft. Обратите внимание, что хотя приведенные ниже инструкции указывают на перезагрузку, я обнаружил, что IE обычно сразу же принимает изменения.
Метод 1. Укажите имена хостов (предпочтительный метод, если требуется проверка подлинности NTLM)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0ENTER.IISAdmin служба.Метод 2: отключите проверку обратной связи (менее рекомендуемый метод)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\LsaENTER.Дополнение:
Чтобы установить для параметра реестра DisableStrictNameChecking значение 1:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\ParametersENTER.Вот командлеты PowerShell, которые я написал для управления настройками проверки обратной связи. Он включает код, который пытается получить имена хостов для всех веб-сайтов IIS, использующих проверку подлинности Windows, и устанавливает имена хостов обратного подключения.
Import-Module WebAdministration
function Add-BackConnectionHostName
{
<#
.SYNOPSIS
Adds the back connection hostnames that will bypass the server loopback check.
.DESCRIPTION
Adds the hostname to the list of back connection hostnames that will bypass the server loopback check. Back connection host names
can be used to address the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861.
.EXAMPLE
Add-BackConnectionHostName mywebsite.mydomain.tld
.EXAMPLE
Add-BackConnectionHostName mywebsite1.mydomain.tld, mywebsite2.mydomain.tld
.PARAMETER Hostname
The Hostname to add to the back connection hostnames list.
.LINK
Remove-BackConnectionHostName
Get-BackConnectionHostName
Enable-ServerLoopbackCheck
Disable-ServerLoopbackCheck
Get-ServerLoopbackCheck
"You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.microsoft.com/en-us/kb/896861)
#>
[CmdletBinding(SupportsShouldProcess = $true)]
param
(
[Parameter(ValueFromPipeline = $true, Mandatory = $true)]
[string] $Hostname
)
begin
{
$keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0"
$propertyName = "BackConnectionHostNames"
$key = Get-Item $keyPath
$property = $null
$propertyValues = $null
if ($key -ne $null)
{
$property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
if ($property -eq $null)
{
$property = New-ItemProperty $keyPath -Name $propertyName -Value $null -PropertyType ([Microsoft.Win32.RegistryValueKind]::MultiString) -ErrorAction Stop
Write-Verbose "Created the $($propertyName) property."
}
if ($property -ne $null)
{
$propertyValues = $property.$propertyName
}
}
}
process
{
if ($property -ne $null)
{
foreach ($hostNameValue in $Hostname)
{
if ([string]::IsNullOrWhiteSpace($hostName) -eq $false -and $propertyValues -notcontains $hostNameValue)
{
$propertyValues += $hostNameValue
Write-Verbose "Added $($hostName) to the back connection hostnames."
}
else
{
Write-Verbose "Back connection host names already has an entry for $($hostName)."
}
}
}
}
end
{
if ($propertyValues -ne $null)
{
$propertyValues = $propertyValues | ?{ [string]::IsNullOrWhiteSpace($_) -eq $false } | Sort -Unique
Set-ItemProperty $keyPath -Name $propertyName -Value $propertyValues
}
}
}
function Remove-BackConnectionHostName
{
<#
.SYNOPSIS
Removes the hostname from the list of back connection hostnames that will bypass the server loopback check.
.DESCRIPTION
Removes the hostname from the list of back connection hostnames that will bypass the server loopback check.
.EXAMPLE
Remove-BackConnectionHostName mywebsite.mydomain.tld
.EXAMPLE
Remove-BackConnectionHostName mywebsite1.mydomain.tld, mywebsite2.mydomain.tld
.PARAMETER Hostname
The Hostname to remove from the back connection hostnames list.
.LINK
Add-BackConnectionHostName
Get-BackConnectionHostName
Enable-ServerLoopbackCheck
Disable-ServerLoopbackCheck
Get-ServerLoopbackCheck
"You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.microsoft.com/en-us/kb/896861)
#>
[CmdletBinding(SupportsShouldProcess = $true)]
param
(
[Parameter(ValueFromPipeline = $true, Mandatory = $true)]
[string] $Hostname
)
begin
{
$keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0"
$propertyName = "BackConnectionHostNames"
$key = Get-Item $keyPath
$property = $null
$propertyValues = $null
if ($key -ne $null)
{
$property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
if ($property -ne $null)
{
$propertyValues = $property.$propertyName
}
else
{
Write-Verbose "The $($propertyName) property was not found."
}
}
}
process
{
if ($property -ne $null)
{
foreach ($hostNameValue in $Hostname)
{
if ($propertyValues -contains $hostNameValue)
{
$propertyValues = $propertyValues | ? { $_ -ne $hostName }
Write-Verbose "Removed $($hostName) from the $($propertyName) property."
}
else
{
Write-Verbose "No entry for $($hostName) was found in the $($propertyName) property."
}
}
}
}
end
{
if ($property -ne $null)
{
$propertyValues = $propertyValues | ?{ [string]::IsNullOrWhiteSpace($_) -eq $false } | Sort -Unique
if ($propertyValues.Length -ne 0)
{
Set-ItemProperty $keyPath -Name $propertyName -Value $propertyValues
}
else
{
Remove-ItemProperty $keyPath -Name $propertyName
Write-Verbose "No entries remain after removing $($hostName). The $($propertyName) property was removed."
}
}
}
}
function Get-BackConnectionHostName
{
<#
.SYNOPSIS
Gets the list of back connection hostnames that will bypass the server loopback check.
.DESCRIPTION
Gets the back connection hostnames that will bypass the server loopback check. Back connection host names can be used to address
the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861.
.EXAMPLE
Get-BackConnectionHostName
.LINK
Add-BackConnectionHostName
Remove-BackConnectionHostName
Enable-ServerLoopbackCheck
Disable-ServerLoopbackCheck
Get-ServerLoopbackCheck
"You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.microsoft.com/en-us/kb/896861)
#>
[CmdletBinding(SupportsShouldProcess = $false)]
param
(
)
begin
{
$keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0"
$propertyName = "BackConnectionHostNames"
$key = Get-Item $keyPath
$property = $null
if ($key -ne $null)
{
$property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
if ($property -eq $null)
{
Write-Verbose "The $($propertyName) property was not found."
}
}
}
process
{
$propertyValues = $null
if ($property -ne $null)
{
$propertyValues = $property.$propertyName
}
return $propertyValues
}
end
{
}
}
function Enable-ServerLoopbackCheck
{
<#
.SYNOPSIS
Enables the server loopback check. Enabled is the normal state for a Windows Server.
.DESCRIPTION
Enables the server loopback check. Having the loopback check enabled is the normal state for a Windows Server. Disabling the loopback check can be used to address
the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861. It is NOT the preferred method. See the KB article for more details.
.EXAMPLE
Enable-ServerLoopbackCheck
.LINK
Add-BackConnectionHostName
Remove-BackConnectionHostName
Get-BackConnectionHostName
Enable-ServerLoopbackCheck
Get-ServerLoopbackCheck
"You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.microsoft.com/en-us/kb/896861)
#>
[CmdletBinding(SupportsShouldProcess = $true)]
param
(
)
begin
{
$keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa"
$propertyName = "DisableLoopbackCheck"
$key = Get-Item $keyPath
$property = $null
if ($key -ne $null)
{
$property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
if ($property -eq $null)
{
Write-Verbose "The $($propertyName) property was not found."
}
}
}
process
{
if ($property -ne $null)
{
Set-ItemProperty $keyPath -Name $propertyName -Value 0
}
}
end
{
}
}
function Disable-ServerLoopbackCheck
{
<#
.SYNOPSIS
Disables the server loopback check for all hostnames. Enabled is the normal state for a Windows Server.
.DESCRIPTION
Disables the server loopback check for all hostnames. Having the loopback check enabled is the normal state for a Windows Server. Disabling the loopback check can be used
to address the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861. It is NOT the preferred method. See the KB article for more details.
.EXAMPLE
Disable-ServerLoopbackCheck
.LINK
Add-BackConnectionHostName
Remove-BackConnectionHostName
Get-BackConnectionHostName
Enable-ServerLoopbackCheck
Get-ServerLoopbackCheck
"You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.microsoft.com/en-us/kb/896861)
#>
[CmdletBinding(SupportsShouldProcess = $true)]
param
(
)
begin
{
$keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa"
$propertyName = "DisableLoopbackCheck"
$key = Get-Item $keyPath
$property = $null
if ($key -ne $null)
{
$property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
if ($property -eq $null)
{
Write-Verbose "The $($propertyName) property was not found."
}
}
}
process
{
if ($property -ne $null)
{
Set-ItemProperty $keyPath -Name $propertyName -Value 1
}
else
{
$property = New-ItemProperty $keyPath -Name $propertyName -PropertyType ([Microsoft.Win32.RegistryValueKind]::DWord) -Value 1
}
}
end
{
}
}
function Get-ServerLoopbackCheck
{
<#
.SYNOPSIS
Gets the status of the server loopback check. Enabled is the normal state for a Windows Server.
.DESCRIPTION
Gets the status of the server loopback check. Having the loopback check enabled is the normal state for a Windows Server. Disabling the loopback check can be used
to address the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861. It is NOT the preferred method. See the KB article for
more details.
.EXAMPLE
Get-ServerLoopbackCheck
.LINK
Add-BackConnectionHostName
Remove-BackConnectionHostName
Get-BackConnectionHostName
Enable-ServerLoopbackCheck
Disable-ServerLoopbackCheck
"You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.microsoft.com/en-us/kb/896861)
#>
[CmdletBinding(SupportsShouldProcess = $false)]
param
(
)
begin
{
$keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa"
$propertyName = "DisableLoopbackCheck"
$key = Get-Item $keyPath
$property = $null
if ($key -ne $null)
{
$property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
}
}
process
{
$loopbackCheckStatus = "Enabled"
if ($property -ne $null)
{
switch ($property)
{
0 { $loopbackCheckStatus = "Enabled" }
1 { $loopbackCheckStatus = "Disabled" }
default { $loopbackCheckStatus = "Unknown" }
}
}
return $loopbackCheckStatus
}
end
{
}
}
function Get-WebsiteHostname
{
<#
.SYNOPSIS
Gets the hostnames for the IP addresses bound to a web site.
.DESCRIPTION
Gets the hostnames for the IP addresses bound to a web site. Where a host header exists, the host header is used; otherwise, the IP address is looked up
in DNS to see if a PTR record exists.
.EXAMPLE
Get-WebSiteHostname $webSite
.EXAMPLE
Get-WebSiteHostname -Name 'Default Web Site'
.EXAMPLE
Get-Website | Get-WebSiteHostname
.LINK
Get-Website
#>
[CmdletBinding(SupportsShouldProcess = $false)]
param
(
[Parameter(ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $true)]
[string] $Name
)
process
{
$siteHostnames = @()
foreach ($webSiteName in $Name)
{
$bindings = Get-WebBinding -Name $Name
foreach ($binding in $bindings)
{
$bindingInfo = $binding.bindingInformation.Split(':')
$hostHeader = $bindingInfo[2]
$bindingInfoAddress = $null
$isValidIP = [System.Net.IPAddress]::TryParse($bindingInfo[0], [ref] $bindingInfoAddress)
$siteHostname = $null
if ($bindingInfo -eq '*')
{
Write-Warning "The $($webSiteName) web site has a binding address set to All Unassigned."
}
elseif ([string]::IsNullOrWhiteSpace($hostHeader) -eq $false)
{
$siteHostname = $hostHeader
Write-Verbose "The $($webSiteName) web site has a host header set to $($siteHostname)."
}
elseif ($isValidIP -eq $true)
{
$siteHostname = (Resolve-DnsName $bindingInfoAddress -DnsOnly PTR -ErrorAction SilentlyContinue).NameHost
if ($siteHostname -ne $null)
{
Write-Verbose "The $($webSiteName) web site has an IP Address $($bindingInfoAddress) that resolves to $($siteHostname)."
}
else
{
Write-Warning "The $($webSiteName) web site has an IP Address $($bindingInfoAddress) with no PTR record."
}
}
}
if ($siteHostname -ne $null)
{
$siteHostnames += $siteHostname
}
}
return $siteHostnames | Sort -Unique
}
}
# Use the IIS administration commandlets and the ones above to do the
# following:
# 1. Get all the IIS web sites that use Windows authentication.
# 2. Get the hostnames from either the host header setting or the
# DNS reverse lookup of the hostnames from the IP address.
# 3. Add the hostnames to the BackConnectionHostNames registry key.
# 4. Display the contents of the BackConnectionHostNames registry key.
$windowsAuthenticatedWebSites = Get-Website | ?{ (Get-WebConfiguration -Filter '/system.web/authentication' -PSPath $_.PSPath).mode -eq 'Windows' }
$webSiteHostnames = $windowsAuthenticatedWebSites | Get-WebsiteHostname
$webSiteHostNames | Add-BackConnectionHostName
Get-BackConnectionHostName